cheap pandora style bracelets pandora outlet uk

Jewelry design inevitably need to express a variety of precious stones and the shape of a variety of precious metal flower shape, the following describes the common gem style and precious metal painting. Common gemstone cutting style round, oval, olive, horse-shaped, pandora rings jewelry sale Jewelry design drawing entryrectangular, emerald and so on.
Round cutting of a painting (15mm × 15mm)

1, draw a cross line.
2, draw a 45 degree angle line.
3, with a circular plate to the diameter of a stone to draw a circle, the circle is round cut shape line.
4, connecting the intersection between the crossed line and the circular contour line, the formation of a square; the same connection between the diagonal and circular contour line between the intersection, the formation of another square.
5, wipe the auxiliary line, draw the entire desktop shadow.
Round cutting of the painting two (10mm × 10mm) pandora jewelry for sale

1, in the cross line to draw a 45-degree line, round shape to draw a circle.
2, in the circle which draw a small round, connecting the cross line and 45 degrees angle line and the intersection between the small round.
3, connect all the cross points after the formation of cutting surface.
4, wipe all the inside of the circular auxiliary line.
5, painted on the shadow.
Horse-eye cutting of a painting (18mm × 10mm)

1, draw a cross line, determine the length and width of the gem. Take the intersection of the crosshair as the center point and mark the half of the width and length of the gem pandora bracelet charms.
2, the circular plate of the horizontal mark with the horizontal alignment corresponding to draw through the mark of the arc.
3, connecting the intersection between the intersection and the circle.
4, from the vertex to the length of the half divided into three equal parts, in 1/3 to draw the gem of the cutting surface.
5, wipe the auxiliary line, and add the shadow.
Horse-eye cutting of the painting two (12mm × 6mm)

1, with a circular plate with a horizontal alignment, draw through the gem length and width of the mark circle.
2, draw a male eye shaped rectangle, and draw the diagonal.
3, with a circular plate on the inside of the gem to draw another smaller round like.
4, to cross the line and diagonal as a starting point to draw the gem of the cutting surface.
5, wipe the auxiliary line, add the shadow charms for pandora bracelet.
Oval-shaped cutting of a painting (18mm × 12mm)

1, draw a cross line, in the gem width and length of the 1/2 marked on the mark.
2, to oval ruler to draw through the mark of the oval.
3, connecting the intersection between the cross line and the ellipse.
4, from the vertex to the length of half of the part is divided into three equal parts, marked on / 3 marked, painted gem cutting surface.
5, wipe the auxiliary line, add the shadow.
Oval cutting of the painting two (12mm × 9mm)

1, draw the cross line and the oval, in its periphery draw an external rectangle.
2, in the rectangle to draw the diagonal.
3, draw another smaller ellipse inside the ellipse.
4, to cross the line and diagonal as a starting point, such as the picture out of the gem of the cutting surface.
5, wipe the auxiliary line, add the shadow charms for bracelets pandora.
Pear-shaped cutting of a painting (18mm × 12mm)

1, draw a cross line to the width of the gem to draw a semicircle in diameter, the length of the gem on the vertical axis marked on the mark.
2, the circular plate of the horizontal mark with the horizontal alignment corresponding, draw through the mark of the circle (left and right sides draw a).
3, connecting the intersection between the cross line and the pear shape.
4, from the vertex to the horizontal alignment center is divided into three equal parts, marked in 1/3 mark and draw parallel lines; the bottom of the same interval to draw parallel lines pandora bracelet & charms.
5, connect these lines and pear shape between the intersection.
6, erase the auxiliary line, add the shadow.
Pear-shaped cutting of the painting two (14mm × 10mm)

1, draw a cross line, draw a semicircle at the center, with the length of the gem on the vertical axis marked on the mark.
2, the circular plate of the horizontal mark with the horizontal alignment corresponding to draw the circle through the mark.
3. Draw a rectangle connected to the pear shape and draw a diagonal. Draw a smaller pear on the inside.
4, to cross the line and diagonal as a starting point, draw the gem of the cutting surface bracelet with charms pandora.
5, wipe the auxiliary line, add the shadow.

Leave a Reply

Your email address will not be published. Required fields are marked *