discount pandora jewelry online store pandora jewelry sale 2017

Heart-shaped cutting of a painting (16mm × 15mm)

1, draw a cross line, draw two heart-shaped stone width half of the diameter of the semicircle sale pandora earrings.
2, to the length of the gem as the vertical axis to circular plate to connect the two rounds and the bottom of the bottom, the formation of heart-shaped.
3, connect the center of each circle and the cross between the points.
4, from the vertex to the horizontal line between the marked on the mark, and draw the horizontal line, the lower half of the same interval size to draw the horizontal line.
5, connect the upper and lower horizontal and round the intersection.
6, erase the auxiliary line, add the shadow.
Heart-shaped cutting of the painting two (12mm × 12mm)

1, draw the cross line, and Figure 44 as in the same way to draw heart-shaped.
2, in the heart-shaped peripheral draw a rectangle, left and right to draw the diagonal and connect the two diagonal cross, forming a horizontal line.
3, in the heart-shaped inside painted a smaller heart-shaped pandora in store sale.
4, to cross the line and diagonal as a starting point, such as the picture out of the gem cutting surface.
5, wipe the auxiliary line, add the shadow.
Square cut of the painting (18mm × 12mm)

1, draw a cross line.
2, marked in the cross on the gem length and width of the mark, and draw a rectangle.
3, the half of the width of the gem is divided into three equal parts, draw the gem desktop line.
4, draw the gem of the desktop, connecting the desktop and the outer four corners of the square.
5, wipe the auxiliary line, add the shadow.
Trapezoidal cutting of the painting (18mm × 12mm)

1, draw the cross line, according to the length and width of the gem marked.
2, connect these marks, the formation of trapezoidal quadrilateral.
3, the upper part of the three equal parts, 1/3 of the width of the trapezoid and the size between the desktop.
4, the same interval size to draw the gem of the desktop, and connect the desktop and the outer trapezoidal four corners.
5, wipe the auxiliary line, add the shadow pandora bracelet charms.
The image of the emerald-cut (1: 18mm x 12mm)

1, draw a cross alignment, determine the length and width of the gem, draw the rectangle.
2, will be half of the width of the three equal points, in 1/3 to draw the gem of the desktop.
3, the width of half the size of the gem will be three points and marked with the mark, connect these points, the formation of the bottom of the precious stones.
4, connect the mark point and the extension of the desktop and the intersection of the outer rectangle.
5, the use of triangular drawing parallel lines and gem cutting surface. Remove the four corners, then pay attention to whether the gem of a skew phenomenon, the removal of the four corners must be exactly the same angle.
6, erase the auxiliary line, add the shadow pandora jewelry website .
Emerald cut the two (12mm × 10mm)

)

1, in the cross on the line to draw the length and width of the mark, connected to form a rectangle.
2, on the vertical axis of the length of the gem of the three equal parts, and with four corners together, in the four corners and draw lines perpendicular to each other.
3, connect the three points with the vertical line and the intersection of the rectangle to form a triangle.
4, in the inside to double the line to draw a smaller emerald (octagonal).
5, wipe the inside of the desktop auxiliary line, add the shadow.
Egg surface cutting of the painting

For eggs or pearls and other non-cutting surface of the gem, along the shape of the curve can be smooth to add the shadow. W   en halo, strengthen the upper left and lower right pandora bracelet jewelry. If you want to show a thick gem, you can describe the shadows at the center, want to show a thin gem can be painted on the edge of the shadow line.

Leave a Reply

Your email address will not be published. Required fields are marked *